Hand Press
The use of oil press by Tom01
use oil press, you should first prepare all the aids and containers, check and adjust belt tightness. Then start the motor, running 15min or so to empty the machine, check the pressing screw shaft speed. Speed ??should be around in 33dmin general. Idle time to pay attention to the gear box and gear meshing sound is normal, the bearing parts and motor are normal. Oil presses idle, the motor current should be about 3A. If current is too high, you should immediately stop checks, adjustments and then boot. </ P>
normal load, around 50kg ready rapeseed or soybeans, ready to put into the hopper. Note: Start feeding when the press can not be too fast, or a sudden increase in pressure within the chamber squeeze, squeeze not turn screw axis, resulting in blockage squeeze bore, and even squeeze cage rupture, a major accident. So start compression, feed should be evenly and slowly put into the hopper, so that the running-in oil press. So repeatedly, continued for more than 3 ~ 4h, so that the temperature gradually increased oil press, and even to take smoke (which is normal). When the press began to squeeze the chamber temperature is low, a slow twist, withered on the handle section of the stud, and increase of cake thickness, while increasing the moisture into the pressing billet, the temperature chamber to be squeezed. Rose to about 90 â
